How to apply MicrobeCare™?
Quick and easy set-up protocol for MicrobeCare™ 70-2 and its maintenance.
Step 1 : Deep Cleaning
Use a detergent product to remove all organic dirt and bioburden (microorganisms) from soiled surfaces before applying MicrobeCare™ 70-2. To be efficacious, it must make direct contact with the surface to be coated. If application is not complete and uniform, microbes will grow on untreated areas.
Step 2 : Application
MicrobeCare™ 70-2 is ready to use. Do not dilute the solution. Apply MicrobeCare™ 70-2 with a trigger sprayer directly to the surface to be the treated. Spray from a distance of 20cm. 6 to 8 sprays/m2.
or
Apply MicrobeCare™ 70-2 with an electrostatic sprayer directly to the surface to be treated. Set the Electrostatic Spray Gun at 40 Microns and spray at a distance of 60 to 80 cm from the nozzle to the surface. Contact time and drying : Allow product to dry. Do not touch until the product is dry.
Step 3 : Action Time
MicrobeCare™ 70-2 reaches its efficacity in 60 minutes.
Step 4 : Microfiber Wipe
Application with Trigger Spray: Wipe with a clean microfibre. Do not rinse.
Application with Electrostatic Spray: There is no need to wipe the surface. Simply let it dry
Step 5 : Daily Protocol
It is essential to keep surfaces clean after the surface treatment. It can always contact and destroy microbes. Clean daily using a detergent.
NO NEED TO DISINFECT FOR 365 DAYS!